EasyManua.ls Logo

SOLTEK SL-65EP-T - Page 65

Default Icon
102 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 4 BIOS Setup
65
OS Select For DRAM >
64MB
Select OS2 only if you are running OS/2 operating
system with greater than 64MB of RAM on your
system.
3. Press <ESC> to return to the Main Menu when you finish setting up all
items.
Security Option If you have set a password, select whether the
password is required every time the System
boots, or only when you enter setup.
The choices: system; setup.
Report No FDD For
Win95
Yes:BIOS reports “NO FDD” to Win95.
No (default): BIOS will not report “NO FDD” to Win95.
Typematic Rate Setting When Disabled , the following two items (Typematic Rate
and Typematic Delay) are irrelevant. Keystroke repeats
at a rate determined by the keyboard controller in your
system.
When Enabled , you can select a typematic rate and
typematic delay.
Typematic Rate (Chars
/ Sec)
When the typematic rate setting is enabled, you can
select a typematic rate (the rate at which character
repeats when you hold down a key) of 6, 8, 10, 12,
15, 20, 24, or 30 characters per second.
Typematic Delay
(Msec)
Choices: 250; 500; 750; 1000. This option sets the
time interval for displaying the first and the second
characters. If enabled, the time interval is optional.

Table of Contents

Related product manuals