65EP-T/EP+-T
76
2. Use one of the arrow keys to move between options and modify the
selected options by using PgUp / PgDn / + / - keys. An explanation of the
<F> keys follows:
<F1>: “Help” gives options available for each item.
<F5>: Get the previous values. These values are the values with which the
user starts the current session.
<F6>: Load all options with the BIOS default values.
<F7>: Load all options with the Setup default values.
ACPI Suspend Type This item allows you to select the ACPI suspend
type. You can select S1(POS) for power on suspend
under Windows 98 ACPI mode.
The choices: S1(POS).
ACPI Function Select Enabled only if your computer’s operating
system supports the Advanced Configuration and
Power Interface (ACPI) specification. Currently,
Windows NT 5.0 supports ACPI.
Power Management This option allows you to select the type (or degree)
of power saving for Doze, Standby, and Suspend
modes.
This table describes the power management modes
for your reference:
Max Saving
User Define
Min Saving
Maximum power savings. Only Available for SL CPUs.
Inactivity period is 1 minute in each mode.
Set each mode individually. Select time-out period in
the section for each mode stated below.
Minimum power savings. Inactivity period is 1 hour in
each mode (except the hard drive).
To Next Page
Loading...
