Adjust the Uppper Stop Position
Step 1 / 4
Warning
The upper stop position cannot be
adjusted if you don't allow the blind to
stop on its own accord. When pressing
the Up button, allow the blind to stop
automatically before carrying on with
the adjustment procedure.
ADJUSTING THE UP STOP POSITION
PRESS the 'UP' button to send the blind to the current
upper stop position - allow the blind to stop on its
own accord.
Step 2 / 4
Warning
Make sure you press the Up & Down
buttons at the same time, otherwise
this program step will fail.
Once the blind has stopped at the current upper stop
position, PRESS & HOLD both the Up & Down buttons
together until the blind jogs (approx 5 secs).
Tip
Rather than count, wait for the blind to jog
- don't release the buttons until you see the
blind jog briey Up/Down.
Version 41
16