Somfy Rollup Motor Reset
Step 1 / 7
Warning
BEFORE YOU BEGIN - if you have
multiple blinds, make sure you
disconnect the power or put in sleep
mode all other blinds in range while
programming.
RESET GUIDE
PRESS & HOLD the PROGRAM/RESET button on the
motor head until the blind jogs 3 times (approx 10
secs). All setting are deleted and the motor has been
reset.
The program/reset button will differ depending on the
Somfy motor model - see images for reference.
Tip
Rather than count, wait for the blind to jog
x3 times - don't release the button until you
see the blind jog briey Up/Down three
times.
Step 2 / 7
TAKE CONTROL OF THE BLIND
BRIEFLY PRESS & RELEASE the UP & DOWN buttons
together on the control - the blind will jog Up/Down.
You can now operate the blind, but it will only move
when the control buttons are held down.
Tip
A jog is a brief up and down motion.
Version 41
22
To Next Page
Loading...
