SOMFY V SYSTEM PRO - 6 Monitor Settings; OSD Menu

EN
Copyright © 2016 Somfy SAS. All rights reserved.
8
6  MONITOR SETTINGS
37 38 39 40
Bottom view
12
13
35
36
Front panel Back of the front panel
12
Buzzer level selector
Perform a buzzer test, adjust the 3-position selector to the position that
suits you.
13
Conversation volume setting
thumb-wheel
Perform a communication test with the external module. Turn the
thumb-wheel until the voice of the person speaking can be heard clearly.
38
Brightness, contrast and screen
colour adjustment button.
Monitor on standby, press
to activate the screen and access the OSD
menu (see below).
This menu allows the user to set the date, time, brightness, colour and
contrast.
Caution: this screen switches off aer about 10 seconds if no buttons
are pressed.
6.1 OSD menu
[1]. Monitor on standby, press to activate the screen and access the OSD menu.
Note: a different pictogram appears at the top right of the screen depending on whether an SD
micro-card has been inserted
SD
or not in the monitor. If there is no SD micro-card,
it will not be possible to transfer the recordings present in the internal memory of the monitor.
[2]. Press:
-
to access the menu (go to stage [3].).
-
to visualise the recordings made previously (see “9.2 Operations possible on saved recordings”, page 11).
-
to activate or deactivate the automatic recording option (see “9.1 Automatic or manual photographing”, page
11).
[3]. Press or to choose the parameter to be adjusted
(see “6.2 Modifiable parameters”, page 9).
[4]. Press
to activate the modification of the parameter selected.
[5]. Press or to modify the value of the parameter.
[6]. Press
to validate the modification or to cancel the modification.
[7]. Press
to exit the menu or or to select the “Exit” parameter.
[8]. If you have chosen the “EXIT” parameter, press
to exit the OSD menu.
Note: the monitor switches to standby aer about 10 seconds if no menu buttons are pressed.
MENU
DISPLAY
MEMORY
TIME
EXIT
Memory
Auto
Menu
Photo