1 Safety 4
1.1 Intended use 4
1.2 Symbols used 4
1.3 General safety instructions 4
1.4 Target groups and qualifications 5
2 Device overview 6
2.1 Scope of delivery 8
2.2 Technical data 8
2.3 Storage 8
2.4 EU manufacturer’s declaration 9
3 Installation 10
3.1 Installing the housing 10
3.2 Connecting the control unit 11
3.3 Connecting the safety contact strip (Safety 1) 13
3.4 Fitting the housing cover 14
4 Initial operation 15
4.1 Activating dead man operation 15
4.2 Controlling the direction of the motor 16
4.3 Setting the motor limit switches 16
4.4 Setting the run time (run time monitoring) 17
4.5 Wiping the radio receiver’s memory 17
4.6 Programming the transmitter button to
pulse mode 18
4.7 Closing the housing cover 18
6 Connections and functions 19
6.1 Terminal strips (overview) 19
6.2 DIP switches 22
6.3 Buttons and LEDs 24
6.4 Connecting the warning light and the lighting 26
6.5 Connecting the 2- or 3-function pad 27
6.6 Connecting the pulse button 28
6.7 Connecting the pre-limit switch 28
6.8 Connecting the light barrier (Safety 2) 29
6.9 Connecting the EMERGENCY OFF switch 30
6.10 Connecting the arrester 30
6.11 Other command devices 31
6.12 TorMinal 31
6.13 Setting the warning function 32
6.14 Automatic closing function 32
6.15 Operator response to detected obstacle 34
Contents
RDC vision
en2
To Next Page
Loading...