MPI-520 – USER MANUAL
Connect the meter to the object tested.
Measurement starts automatically.
Press START push-button in order to start a
next measurement without disconnecting test
leads from the object.
Remarks:
ATTENTION!
When “Object under voltage” message is displayed, the object tested is live. The
measurement is blocked. The meter must be immediately disconnected from the ob-
ject.
Additional information displayed by the meter
Interference voltage occurs on the object tested. The meas-
urement is possible however it will be burdened with addi-
tional uncertainty that is specified in the technical data.
To Next Page
Loading...
