MPI-520 – USER MANUAL
Select deletion of the whole memory, a
memory bank or a measurement by means
of and push-buttons.
Follow the instruction displayed by the meter.
5 Data transmission
Remarks:
- Data transmission is not possible during the charging of accumulators.
- Starting with firmware version 2.95, the support for data transmission via OR-1 module is disabled.
5.1 Computer connection accessories
What is necessary in order to operate the meter with a computer is additional accessories,
namely a USB cable and appropriate software. If the required accessories such have not been pur-
chased along with the meter, then they are available from the manufacturer or an authorised distributor.
The accessories may be used in case of many devices manufactured by SONEL S.A. which
are equipped with the USB interface.
Detailed information regarding software is available from the manufacturer or an authorised
distributor.
5.2 Data transmission with USB joint
1. Set the rotational function selector at MEM.
2. Connect the cable to the USB port of the computer and the USB socket of the meter.
3. Start the programme.
5.3 Data transmission with OR-1 radio module
1. Connect OR-1 module to the USB socket of the PC.
2. Start data filing programme.
3. Select Wireless transmission in the main MENU of the meter
To Next Page
Loading...
Need help?
General
