3-6
34. Tilt information The tilt information currently set is shown.
1. Range The current range is displayed.
2. Tilt The current tilt is displayed.
3. Water depth The water depth received is displayed as a numerical value, and a
line is shown for the corresponding depth.
4. Gain The current gain is displayed.
5. Directional width distance
The directional width distance indication shows the transmission
directional width distance of the multiple mark.
6. Directional width
This is the transmission directional width at the distance at a
position where the tilt line and the multiple mark cross each other.
7. Tilt line The center line indicates the current tilt, and the upper and lower
lines indicate the transmission directional angle.
8. Tilt scale The scale markings are per 5°. The display range is 0° to −60°.
9. Multiple marks These marks are displayed with intervals for which the length is
the divided length of the current range into three to five sections.
10. Distance Shows distance from a vessel to range ring mark.
5. Directional width distance
To Next Page
Loading...