iv
Safety and handling instructions
In order to use the instrument safely and correctly, fully read and understand
this operation manual.
Ask our repair service personnel about maintenance of the instrument. Be
sure not to have the instrument overhauled by anyone other than qualified
repair personnel.
Always keep this manual handy.
Pictorial Indication
In order to correctly use the product and prevent injury to users or other persons
or damage to property from occurring, be sure to carry out the following matters
according to the indication of this manual and product. The indication symbols
mean the following:
This symbol means “if you mishandle the instrument,
occurrence of imminent danger causing death or a serious
injury is anticipated.
This symbol means “if you mishandle the instrument, the
possibility of causing death or a serious injury is anticipated.
The symbol means “if you mishandle the instrument, the
possibility of causing a moderate or light injury, or damage to
property, is anticipated.
Prevention of electric shock by high voltage part
1. When you check the internal portion for maintenance or
inspection, be sure to turn the power switch off because high
voltage is used in some parts.
2．At the inspection, wash away salt on your hands, or when work
clothes, shoes, or the like is wet, change it with dried one.
3. In the unlikely event that you find a person struck by electricity, if
you directly touch the person, you may be also in danger of
receiving an electric shock. Therefore, inform everybody of it
without panic in a loud voice and turn the power switch off, or get
the person off the spot using a plate or the like. Then bring the
person back to life by artificial respiration or general method.
To Next Page
Loading...
General