Sonic SCS-60 - Sub Area 1

5-5
5.2.2 Registering a function to one of the sub-area selection items on the sonar
screen
Registration procedure:
A preset function can be registered in “SUB AREA 1” or “SUB AREA 2.”
As in menu operations, the registration is performed using the cross-cursor and the
menu key ( ).
(1) Press the menu key ( ) of the controller to open the menu.
(2) Put the cross-cursor on "PRESET" in the menu, and then press the menu key
( ).
(3) With the function that you want to register selected by the cursor, press the menu
key ( ).
(4) Put the cross-cursor on the frame of the function that you want to register on the
reservation screen of “SUB AREA 1” or “SUB AREA 2,” and then press the menu
key ( ).
(5) Register the function that you selected to the reservation screen of “SUB AREA 1”
or “SUB AREA 2.”
Example: Registering "TX PULSE" to the reservation screen
(1) Open "MENU" and select "PRESET 1" from “SUB AREA 1.” The reservation screen
will be displayed on “SUB AREA.”
SUB AREA 1
SUB AREA 2
SUB AREA 3
SUB AREA 4
Select "SHORTCUT 1."