Sonic SCS-60 - Setting Details; Points to Note for Setting Details; Opening OPTION

4-5
4.4 Setting details
4.4.1 Points to note for setting details
The sonar system, the change of a set value may result in an adverse effect on system
performance. In principle, changes are made by our service engineers. However, if
changes are made by yourself, you must be very careful not to influence system
performance.
If you cannot restore the original settings, perform the procedure described in
"Example: When restoring the standard settings" of 4.2.1 Selecting a setting. Then,
you can restore the standard settings.
4.4.2 Opening " OPTION "
“OPTION” can be opened as follows.
After the operation as described in 1, press the menu key ( ). Then, "OPTION"
opens.
The setting details list shows the contents of " OPTION."
1. Move the cursor with the
track ball to the bottom of the
screen.
Enlarged view of the area in the red circle