Sonic SCS-60 - Display Method; Sub Screen Input Setting

6-10
6.5.2 Display method
The multiple screens (sub-screens) can be displayed using the cross-cursor and the
setting key ( ) of the controller.
Operation procedure
(1) Set the mode to the multiple screen mode.
(2) Press the setting key ( ) of the controller in the position where you want to
display a sub-screen. Then, the set mark “ ” appears on the screen, and the
multiple screen mode with a sub-screen is started.
6.5.3 Sub screen input setting
In the sub screen input settings, the renewal timing of the multiple screen mode
display can be changed. The timing can be selected from five types: MANUAL, AUTO,
2, 4, and 8.
Operation procedure:
(1) Press the menu key ( ) to open the menu.
(2) Place the cross-cursor over "SUB SCREEN,” and then press the menu key ( )
to open the "SUB SCREEN" menu.
(3) Place the cross-cursor over an input timing setting on the “INPUT TIMING” menu,
and then press the menu key ( ) to change the input timing to the new setting.