2. Transducer storage operation
1) Press the “ascend” key of the hoisting device on the controller and store
the transducer.
2) During ascending, an arrowhead “” is indicated in upper right of the
screen and the display bar of the hoisting amount is gradually reduced.
3) When the transducer is stored and the hoisting device goes up to the upper
limit, the upper limit message is displayed and the hoisting device stops.
On the battery·electric cell exchange
In this instrument, a battery is used to have clock function. Perform exchange
of a battery periodically.
Be sure to change any expired batteries. If you leave a battery unchanged,
there is a risk of smoking and ignition.
＜Target of exchange＞
As to a battery, the target life is set to about two years as a standard. When the
battery is used under a high temperature, the life becomes shorter.
＜Exchange method＞
As to the exchange of a battery, make contact with our service personnel.
Batteries are valuable and recyclable resources. In changing batteries and
used product disposal, cooperate in recycling.
To Next Page
Loading...
General