6-12
6.5.4 Tilt selection/auto tilt mode
By combining the tilt selection and the auto tilt mode, the multiple screen mode can be
used to find out the width of a fish school or the vertical distribution of a fish school.
Method for changing the tilt selection
(1) Press the menu key ( ) to open the menu.
(2) Place the cross-cursor over "SUB SCREEN,” and then press the menu key ( )
to open the "SUB SCREEN" menu.
(3) Place the cross-cursor over "TILT,” and then press the menu key ( ) to open
the "TILT" menu.
(4) Place the cross-cursor over "TILT MODE,” and then press the menu key ( ) to
open the "TILT MODE" menu.
(5) Place the cross-cursor over the tilt set item to be used, and then press the menu
key ( ) to change the tilt mode to the new setting.
To Next Page
Loading...