6-2
Change by means of menu operation
The sonar area modes can also be changed by menu operation using the cross-cursor
and the menu key ( ).
Operation procedure:
(1) Press the menu key ( ) to open the menu.
(2) Place the cross-cursor over "SUB SCREEN," and then press the menu key
( ) to open the "SUB SCREEN" menu.
(3) Place the cross-cursor over "SONAR AREA," and then press the menu key
( ) to open the "SONAR AREA" menu.
(4) Place the cross-cursor over the sonar area mode item to be used, and then
press the menu key ( ) to change the current sonar area mode to the new
one.
To Next Page
Loading...