47
HAZARDOUS LOCATION USAGE
HAZARDOUS LOCATION USAGE
WARNINGS
Determine by inspection that the following information is
made available to the user by one or more of:
1. Printed on the label for the battery.
2. Printed on the label for the host device.
3. Printed in the owner's manual.
4. Posted in a help le or Internet website.
Do not disassemble or open crush, bend or
deform, puncture or shred.
Do not modify or re manufacture, attempt to
insert foreign objects into the battery, immerse
or expose to water or other liquids, expose to
re, explosion or other hazard.
Only use the battery with a charging system
that has been qualied by the system per CTIA
Certication Requirements for Battery System
Compliant to IEEE 1725. Use of an unqualied
battery or charger may present a risk of re,
explosion, leakage or other hazard.
Do not short circuit a battery or allow metallic
conductive objects to contact battery terminals.
Promptly dispose of used batteries in
accordance with local regulations.
Battery usage by children should be supervised.
Avoid dropping the phone or battery. If the
phone or battery is dropped, especially on a
hard surface, and the user suspects damage,
take it to a service center for inspection.
Improper battery use may result in a re,
explosion or other hazard.
IT IS NOT ALLOWED TO CONNECT ANY
EXTERNAL DEVICES TO ALL PORTS/ INTERFACE
(USB) IN A HAZARDOUS AREA.
ONLY THE POWER SUPPLIES WITH OUTPUTS
MEET THE SELV REQUIREMENTS CAN BE USED
FOR CHARGING. THE MAXIMUM ALLOWABLE
INPUT VOLTAGE FOR THE PHONE IS 5V.
DO NOT USE THE NON-LPS ADAPTER TO
CHARGE THE DEVICE. IT MAY CAUSE A FIRE.
EXPLOSION HAZARD - THE BATTERY ONLY
CAN BE CHARGED or CHANGED IN NON-
HAZARDOUS LOCATION.
RISQUE D’EXPLOSION - LES PILE DOIVENT
ETRE REMPLACEES OU CHARGE DANS NON-
DANGEREUX EMPLACEMENT.
DO NOT CONNECT OR DISCONNECT THROUGH
USB PORT WHEN ENERGIZED, UNLESS THE
LOCATION IS KNOWN TO BE NON-HAZARDOUS.
DO NOT OPEN THE BATTERY COVER DOOR IN
HAZARDOUS LOCATIONS.
THE TORQUE FORCE OF BATTERY COVER
SCREW is 1N.m.
CERTIFICATION
cCSAus
CSA Certicate No. 80091175
Class I, Division 2, Groups A, B, C and D,
T4
Class II, Division 2, Groups F and G, T4
Class III, Division 2
CSA C22.2 No. 62368-1-19
ANSI/UL 62368-1, 3
rd
Edition
To Next Page
Loading...
Need help?
General
