[136] Shooting Using the flash
Flash Mode
You can set the flash mode.
Menu item details
Flash Off:
The flash does not operate.
Autoflash:
The flash works in dark environments or when shooting towards bright light.
Fill-flash:
The flash works every time you trigger the shutter.
Slow Sync.:
The flash works every time you trigger the shutter. Slow sync shooting allows you to shoot a
clear image of both the subject and the background by slowing the shutter speed.
Rear Sync.:
The flash works right before the exposure is completed every time you trigger the shutter. Rear
sync shooting allows you to shoot a natural image of the trail of a moving subject such as a
moving car or a walking person.
Wireless:
Using a wireless flash creates a shading effect that gives the subject a more 3D appearance
than when using the camera's flash.
This mode is effective when you attach a remote control-compatible external flash (sold
separately) to the product, and shoot with a wireless flash (sold separately), placed away from
the product.
Note
The default setting depends on the shooting mode.
Some [Flash Mode] settings are not available, depending on the shooting mode.
The [Wireless] setting cannot be used with the camera’s built-in flash.
MENU → (Camera Settings1) → [Flash Mode] → desired setting.
1
To Next Page
Loading...
