Sets whether the focus area should be displayed all the time or should disappear automatically
shortly after focus is achieved.
Menu item details
On:
The focus area disappears automatically shortly after focus is achieved.
Off:
The focus area is displayed all the time.
[304] List of MENU items
Camera Settings1
Disp. cont. AF area
You can set whether or not to display the area that is in focus when [Focus Area] is set to
[Wide] or [Zone], in [Continuous AF] mode.
Menu item details
On:
Displays the focus area that is in focus.
Off:
Does not display the focus area that is in focus.
Note
When [Focus Area] is set to one of the following, the frames in the area that is in focus turn green:
[Center]
[Flexible Spot]
[Expand Flexible Spot]
When an A-mount lens and a Mount Adaptor (LA-EA1/LA-EA3) (sold separately) are mounted on the
camera and [
AF System] is set to [Phase Detection AF], [Disp. cont. AF area] is always turned
on regardless of the [Focus Area] settings.
MENU → (Camera Settings1) → [AF Area Auto Clear] → desired setting.
1
MENU →
(Camera Settings1) → [Disp. cont. AF area] → desired setting.
1
To Next Page
Loading...
