Sony A6500 - Page 341

To turn off automatic switching of the display using the eye sensor, set [FINDER/MONITOR] to
[Viewfinder(Manual)] or [Monitor(Manual)].
[362] List of MENU items Camera Settings2
Finder Frame Rate (still image)
Display the subject's movements more smoothly by adjusting the frame rate of the viewfinder
during still image shooting. This function is convenient when shooting a fast-moving subject.
Menu item details
120fps/100fps:
Displays the movements of the subject more smoothly on the viewfinder.
60fps/50fps:
Displays the subject at a normal frame rate on the viewfinder.
Note
When [ Finder Frame Rate] is set to [120fps]/[100fps], the resolution of the viewfinder is lowered.
[
Finder Frame Rate] is locked to [60fps]/[50fps] in the following modes:
During playback
During movie shooting
During HDMI connection
[363] List of MENU items Camera Settings2
Zebra
The zebra pattern will appear over part of an image if the brightness level of that part meets the
IRE level that you set. Use this zebra pattern as a guide to adjust the brightness.
MENU → (Camera Settings2) →[ Finder Frame Rate] → desired setting.
This function can be assigned to button of your choice using [Custom Key(Shoot.)].
1
MENU →
(Camera Settings2) → [Zebra] → desired setting.
1