Sony A6500 - Page 353

When you call up an application with one touch, even if that application does not work with a
smartphone, PlayMemories Mobile on smartphone will launch. Exit PlayMemories Mobile without
performing an operation. If you do not exit PlayMemories Mobile, the smartphone stays in standby
connection status.
[Smart Remote Embedded] is assigned to [One-touch(NFC)] as a default setting.
[379] List of MENU items Wireless
Airplane Mode
When you board an airplane, etc., you can temporarily disable all the wireless-related functions
including Wi-Fi.
[380] List of MENU items
Wireless
Wi-Fi Settings: WPS Push
If your access point has the Wi-Fi Protected Setup (WPS) button, you can register the access
point to this product easily by pushing the Wi-Fi Protected Setup (WPS) button.
Note
[WPS Push] works only if the security setting of your access point is set to WPA or WPA2 and your
access point supports the Wi-Fi Protected Setup (WPS) button method. If the security setting is set
to WEP or your access point does not support the Wi-Fi Protected Setup (WPS) button method,
perform [Access Point Set.].
For details about the available functions and settings of your access point, see the access point
operating instructions or contact the administrator of the access point.
MENU → (Wireless) → [Airplane Mode] → desired setting.
If you set [Airplane Mode] to [On], an airplane mark will be displayed on the screen.
1
MENU →
(Wireless) →[Wi-Fi Settings] → [WPS Push].
1
Press the WPS button on the access point you want to register.
2