also move the tracking start area to the desired point by designating the area as a flexible spot
or expand flexible spot.
List of focus range finder frames
The focus range finder frame differs as follows depending on the shooting mode.
When focusing on a larger area
When focusing on a smaller area
When [Focus Area] is set to [Wide] or [Zone] and you aim at a moving subject, the focus
range finder frame for “When focusing on a smaller area” may be displayed.
When you attach an A-mount lens with a Mount Adaptor (LA-EA1 or LA-EA3) (sold
separately) and [
AF System] is set to [Phase Detection AF], the focus range finder
frame for “When focusing on a smaller area” may be displayed.
When focus is achieved automatically based on the whole range of the monitor
When you use a zoom function other than the optical zoom, the [Focus Area] setting is
disabled and the focus area frame is shown by the dotted line. The AF operates with priority
on and around the center area.
To move the focus area
When [Focus Area] is set to [Zone], [Flexible Spot] or [Expand Flexible Spot], if pressing the
button to which [Focus Standard] is assigned, you can shoot while moving the focus area
To Next Page
Loading...
