Sony CCD-TR814 - Page 45

AC Power Adaptor
Symptom
Cause and/or Corrective Actions
The POWER lamp does not
light.
Set the selector to VTR (DC OUT) and disconnect the AC
power cord. After about one minute, try again, (p. 8)
The CHARGE lamp flashes.
• See the following chart.
When the CHARGE Lamp Flashes
Check through the following chart.
* If you use a battery pack which you have just bought or which has been left unused for a long
time, the CHARGE lamp may flash at the first charging. This does not indicate a problem. Repeat
again to charge with the same battery pack.
45
Trouble
Check