Sony CCP-13B - Typical Operating CONGITIONS

TYPICAL OPERATING CONDITIONS
Driving signals are relayed from the ORM-10 and control the oper-
ating mode of the cassette printer(s) according to their left-most
track selector setting(s).
AUTOMATIC REWIND AND STOP SYSTEMS
ORM-10: At the attached end foil, the tape will be rewound auto-
matically and at the attached first foil it will stop automatically.
The ORM-10 TRACK selector has no relation to the automatic re-
wind and stop systems.
Cassette printer(s): When the left-most track selector(s) is(are) set
to 4CH, the cassette tapes will be rewound automatically with the
end foil of the ORM-10, and at each beginning-of-tape the cassette
tapes will stop automatically. .
When the selector(s) is(are) set to 2CH, the cassette tapes will stop
automatically at each end-of-tape.
Cassette printer
Operating
button
Operating
button
Cueing (only ORM-10
stops at first foil)
STAND BY
Reproduction relayed
+g dl setaves
Auto rewind
S track
Cueing (independent) selector
4CH
Auto stop
Record
Auto stop (independent)
+
track Stop
stor (tape end)
2CH
REW Rewind (independent)
Stop (independent)
REWIND Rewind
| STOP Stop
14