6
CD MECHANISM DECK (CDM59-5BD32A)
MAIN BOARD
3 three screws
(BVTP3 × 8)
2 three screws
(BVTP3 × 8)
7 wire (flat type) (21 core)
(CN302)
8 connector
(CN311)
5 screw
(BVTP3 × 8)
4 Slide the tray until the screw
that fixes the table ass’y can be
seen through around hole
in the table ass’y.
1 Insert a tapering driver from the bottom of the chassis,
and turn it in the direction of the arrow until the base unit
goes down to the lowest position.
6
9 CD mechanism deck
(CDM59-5BD32A)
a
a
3 two screws
(PTTWH3 × 6)
2 two screws
(BVTP3 × 8)
5 MAIN board
1 two screws
(BVTP3 × 8
4 two PC board holders
To Next Page
Loading...
