Disc – Various functions
25
GB
Setting the password
The password is set to “136900” at the factory.
Before setting Parental Control, change the
password to a 6-digit number of your choice. If
you forget the password, you can also set a new
password by this same method.
1 Remove the disc if it is loaded.
2 Press SETUP.
The Setup Menu appears.
3 Press < or , repeatedly to select
“Password Setup Page,” then press
ENTER.
4 Press M or m to select “Password,”
then press , to select “Change.”
5 Press ENTER.
6 Enter “136900” to “Old Password”
section using the number buttons.
7 Enter a new 6-digit password to “New
Password” section using the number
buttons.
8 Enter the new 6-digit password again
to “Confirm PWD” section to confirm,
then press ENTER.
The new password is set.
Limiting playback by children
You can limit the playback of some DVDs
according to a predetermined level such as the
age of the users.
When a limited scene is played back, that scene
is cut or replaced with a preset other scene.
Note
You cannot set Parental Control unless “Password
Mode” of “Password Setup Page” is set to “On.”
“Password Mode” is set to “On” at the factory. For
details, see “To turn on and off the Parental Control
function” (page 26).
1 Load the disc for which you want to set
Parental Control.
2 Press x twice to cancel Resume Play
(page 12).
3 Press SETUP.
The Setup Menu appears.
4 Press < or , repeatedly to select
“Preference Page,” then press ENTER.
5 Press M or m to select “Parental,” then
press ENTER.
6 Press M or m repeatedly to select the
level you want, then press ENTER.
The lower the value, the more strict the
limitation.
Restricting disc playback
—Parental Control
continued
To Next Page
Loading...
Need help?
General
Weight and Dimensions
