Sony CMT-DF1 User Manual

34
GB
To enhance your system, you can connect optional components. Refer to the operating instructions
provided with each component.
A DIGITAL OUT (OPTICAL) jack
Use a digital optical cord (square, not supplied)
to connect an amplifier, MD deck or DAT deck
with a digital optical input jack. Sound is then
output when the system function is set to DVD.
By connecting this system to the optical input
jack of the optional amplifier equipped with
Dolby Digital or DTS decoder, you can enjoy
the 5.1 channel sound.
In addition, when the CD or DVD audio is linear
PCM, you can make a digital recording from this
system to an MD deck or DAT deck.
B COMPONENT VIDEO OUT
jacks
Use an optional video cord to connect a TV. If
your TV accept progressive format file signals,
you must use this connection and set the
progressive setting to “P-SCAN” (page 23).
C S VIDEO OUT jack
Use an S video cord (not supplied) to connect an
optional TV to this jack. You can enjoy higher
quality video images.
D VIDEO OUT jack
Use a video cord (supplied) to connect the video
input of TV to this jack.
Hooking up optional components
Amplifier or MD deck
To the digital input jack
of the digital component
To the component
video input jack of the
TV or projector
TV or projector
TV
To the S video
input jack of the TV
To the video input jack
of the TV
TV

Sony CMT-DF1 Specifications

General

Bass reflex	Yes
Speaker type	1-way
RMS rated power	10 W
Number of speakers	2
Mid-range driver diameter	100 mm
Total Harmonic Distortion (THD)	10 %
Type	Home audio micro system
Cassette deck	No
Product color	Gray
Disc types supported	CD, CD-R, CD-RW, DVD, DVD+R, DVD+RW, DVD-R, DVD-RW
Supported radio bands	AM, FM
Preset stations quantity	40
Display type	LCD
Speaker depth	187 mm
Speaker width	145 mm
Speaker height	212 mm
Video recording	-
Apple docking compatibility	Not supported
Headphone outputs	1
Power source	AC

Weight and Dimensions

Depth	201 mm
Width	169 mm
Height	218 mm