Tape – Recording/Sound Adjustment
31
GB
Mixing and recording sounds
You can “mix” sounds by playing one of the
components and singing or speaking into a
microphone (not supplied).
The mixed sound can be recorded on a tape.
Use buttons on the unit for the operation.
1 Prepare the source you want to mix.
2 Load a recordable tape.
3 Press FUNCTION repeatedly to select
the source to record (e.g., DVD).
When you want to record from a disc, press
x twice to cancel Resume Play.
4 Press zN, and then start singing,
speaking or playing the desired
source.
Recording starts.
To stop recording
Press xZ.
Tips
• If acoustic feedback (howling) occurs, move the
microphone away from the speakers or change the
direction of the microphone.
• If you want to record your voice through the
microphone only, you can do so by selecting the
DVD function when a disc is loaded and not playing
a disc.
To Next Page
Loading...
