-
• Do not touch the ink ribbon or store the ink ribbon
in a dusty location. Fingerprints or dust on the ink
ribbon may result in imperfect printing.
• Do not rewind the ink ribbon and use the rewound
ink ribbon for printing. Otherwise, proper printing
results will not be obtained, or a malfunction may
occur.
If
the ink ribbon does not click into place,
remove it and then re-insert it. Only when the ink
ribbon is too slack to be loaded, keep pressing the
core
of
the ribbon and wind the ink ribbon in the
direction
of
the arrow to remove the slack.
Do not wind the
ribbon
in
the
directions shown
here.
• Do not disassemble the ink ribbon.
• Do not pull out the ribbon from the ink ribbon.
• Do not remove the ink ribbon while printing.
• Avoid placing the ink ribbon in a location subject
to high temperatures, high humidity, excessive
dust or direct sunlight. Please store it
in
a cool and
dark place and use it within a short period from the
date
of
production. Depending on the storage
conditions, the ink ribbon may deteriorate. Use
of
such an ink ribbon may affect the printed results,
for which we cannot guarantee or compensate.
10
GB
Inserting
the
print
paper
1
Open
the
paper
tray
cover.
Hold the parts on both sides
of
the paper
tray cover (shown with arrows) and open
the paper tray cover.
2
Set
the
print
paper
into
the
paper
tray.
To Next Page
Loading...
Need help?
General
