To
select
the
printer
from
a
Bluetooth-
compliant
device,
select
"Sony
DPP-FP97
##."
("##"
stands
for
the
two
figures
from
the
right
of
the
address
displayed
in
the
LCD
screen.)
When input of Passkey* is required
Input
"0000."
You
cannot
change
the
Passkey
with
the
printer.
* A Passkey
is
often referred to as a "pass code" or
"PIN code."
1 Insert a memory card into the
appropriate memory card slot of the
printer.
Insert
a
memory
card
that
you
want
to
save
an
image
to
be
transferred
only.
The
Bluetooth
saving
mode
window
is
displayed.
On
upper
left
on
the
screen,
~
Save Mode
is
displayed.
2 Transfer an image from the
Bluetooth-compliant mobile phone,
or other device.
Perform
the
similar
procedures
when
you
print
an
image.
For
details,
refer
to
the
operating
instructions
of
the
Bluetooth-
compliant
device
you
are
using.
The
image
transferred
is
saved
in
the
memory
card.
--
• You cannot transfer
an
image to the internal
memory
of
a digital photo printer.
• Do not use the
DPPA-BTI
outside the area you
purchased it. Depending on the areas, the use
of
this product may violate the local radio wave
regulations and may be subject
to
its penalty.
• The communication distance
of
the product may
vary depending on the obstacles (a human body,
metal object, or wall) between the product and the
mobile phone or other device.
• The sensitivity
of
the Bluetooth communication
may be affected in the following conditions:
- When there
is
an obstacle between the product
and the mobile phone or other product such as a
human body, metal object, or a wan.
- Where a wireless LAN is established or a
microwave oven
is
being used near-by, or other
electromagnetic waves are emitted.
• Since a Bluetooth device and a wireless LAN
(IEEE802.ll
bIg) device use the same frequency
ranges, wave interference may occur when the
product is used near a device equipped with a
wireless LAN. This may cause deterioration in the
communication speed and connection conditions.
If
this occurs, take the following measures:
- Keep a distance
of
at the least
10m
from a
wireless LAN device when you connect the
product to a mobile phone.
- Tum offthe wireless LAN device
in
case you
want to use the product closer than
IO
m from
the wireless LAN device.
• We cannot guarantee that this product works with
all devices enabled with Bluetooth wireless
technology.
• Sony cannot assume any responsibility for any
information leakage that may be caused in
Bluetooth communications.
• Sony cannot accept responsibilities for any failure
to satisfy the protection requirements resulting
from a non-recommended modification or use
of
the product.
D Caution
• Radio waves from a Bluetooth device may
adversely affect the operation
of
electrical and
medical devices, and could lead to accidents due to
malfunctions. Make sure to tum off the product
and mobile phone and do not use this product in
the following places:
- Inside medical facilities, trains, airplanes, gas
stations orother places that may emit flammable
gas.
- near automatic doors or fire alarms or other
automatically controlled devices.
• Keep this product at least 22 cm away from cardiac
pacemakers. Radio waves from this product may
adversely affect the operation
of
cardiac
pacemakers.
• Do not disassemble or modify this product. Doing
so could result
in
injury, electric shock, or fire.
51
GB
"'U
..,
S'
-
S"
CO
-
a
3
P>
III
c
co
-
o
~
~
I
()
o
3
"0
iii'
::J
-
C.
~
0'
co
To Next Page
Loading...
