Sony E105 - Backlight Display Settings; Configuring Backlight Behavior

Adjusting the settings of your Network Walkman
31
3 Press the .–/+> button to
select “ON” and press the Nx
button to confirm.
LIGHT:ON
4 Press the MENU button.
The display returns to the normal screen.
To change the setting to “OFF”
Select “OFF” in step 3.
To cancel the Menu mode
Select [RETURN] in the menu screen or press the
MENU button.
Changing the
backlight setting
You can select ON or OFF.
Menu Backlight mode
OFF Always off
ON Turns on for a few seconds
after each operation
(or until scrolling is complete)
To set “ON”
1 Press the MENU button.
The menu screen is displayed.
REPEATMODE>
2 Press the .–/+> button to
select “LIGHT:” and press the
Nx button to confirm.
“OFF” blinks.
LIGHT:OFF
Nx button
MENU button
.–/+> button