recording.
1. - [Camera/Mic] - [ Shooting Assist] - [Display Setting] - desired setting.
Descriptions of menu items
Auto (default setting):
Displays for about 3 seconds.
The rec and zoom buttons on the LCD monitor are displayed.
On:
Always displays. The rec and zoom buttons on the LCD monitor are not displayed.
Note
You cannot change the setting of the icons or indicators on the LCD monitor while in
playback mode.
[132] How to Use
Menu operations Camera/Mic
Zebra
You can display a zebra pattern as a guide for adjusting brightness.
1. - [Camera/Mic] - [ Shooting Assist] - [Zebra] - desired setting.
Descriptions of menu items
Off (default setting):
Does not display the zebra pattern.
(70):
Displays the zebra pattern over the part of an image that exceeds the brightness level of
about 70 IRE.
(100):
Displays the zebra pattern over the part of an image that exceeds the brightness level of
about 100 IRE.
IRE (Institute of Radio Engineers) is a measure of the video signal level that is used as the
bases of brightness; the reference level (pedestal level) is set to 0 (%) and the maximum
level (completely white level) is set to 100 (%).
Note
To Next Page
Loading...
