[61] How to Use Saving images with an external device Using the PlayMemories
Home software
Creating a Blu-ray disc
You can create a Blu-ray disc with an AVCHD movie previously imported to a computer.
To create a Blu-ray disc, the “BD Add-on Software” must be installed.
http://support.d-imaging.sony.co.jp/BDUW/
Your computer must support the creation of Blu-ray discs.
BD-R (unrewritable) and BD-RE (rewritable) media are available for creating Blu-ray
discs. You cannot add contents to either type of disc after creating the disc.
To play back a Blu-ray disc that has been created with a movie that was recorded in [
AVCHD]/[60p Quality ] (1080 60i-compatible device) / [50p Quality ] (1080
50i-compatible device) image quality, you need a device that complies with the AVCHD
Ver. 2.0 format.
You cannot save MP4 or XAVC S images onto a Blu-ray disc.
[62] How to Use Saving images with an external device Saving images on an external
media device
Notes on use of the external media
Read the precautions when using external media.
Note
For this operation, you need the USB Adaptor Cable VMC-UAM2 (sold separately).
Connect the AC Adaptor to this product, and then connect the AC Adaptor to a wall outlet
(wall socket).
Refer to the instruction manual supplied with the external media device.
You may not be able to use external media devices with a code function.
The file systems this product recognizes are FAT32/exFAT/NTFS. To use an external
media device formatted with a file system that this product cannot recognize, format it on
your computer, etc. in advance. Before formatting, make sure that you have no important
data saved on the external media device as formatting will delete the data.
Operation is not guaranteed with all devices satisfying the operating requirements.
The number of scenes you can save on the external media device is as follows. However,
even if the external media device has free space, you cannot save scenes exceeding the
following number.
XAVC S movies: Max. 9,999
To Next Page
Loading...
