Access points without the icon do not require a password to be entered.
Other setting items
Depending on the status or the setting method of your access point, there may be more
setting items.
WPS PIN:
Displays the PIN to enter to the connected device.
IP address setting:
Select [Auto] or [Manual].
IP address:
If you are entering the IP address manually, enter the fixed address.
Subnet mask/Default gateway:
When you set [IP address setting] to [Manual], enter the IP address and subnet mask to
match your network environment.
Priority Connection:
Select [On] or [Off].
Note
To give the registered access point priority, set [Priority Connection] to [On].
Hint
For input method, see “How to use the keyboard.”
[151] How to Use
Menu operations Wireless
Edit Device Name
You can change the device name for Wi-Fi Direct etc.
1. - [Wireless] - [ Setting] - [Edit Device Name].
2. Select the input box, input the device name, and then select .
To Next Page
