Depending on angle to project at, vertical keystone distortion may not be corrected well.
[180] How to Use Menu operations Setup
REC Lamp
You can make the camera recording lamp on the front of this product not to turn on.
1. - [Setup] - [ General Settings] - [REC Lamp] - desired setting.
Descriptions of menu items
On (default setting):
The camera recording lamp lights up.
Off:
The camera recording lamp does not light up.
[181] How to Use Menu operations Setup
Power ON w/monitor (FDR-AX30)
Set whether you turn on/off the product by opening/closing the LCD monitor or not.
1. - [Setup] - [ General Settings] - [Power ON w/monitor] - desired setting.
Descriptions of menu items
On (default setting):
Turns on/off this product when opening/closing the LCD monitor.
Off:
Select this setting when you want to close the LCD monitor during recording.
[182] How to Use Menu operations Setup
Language Setting
To Next Page
