9
GB
GB
4 MONITOR CONTROL
ADAPTOR
(The BKM-FW20 is pre-
installed.)
CONTROL S IN/OUT (Mini jack): You can control pieces of multiple equipment with a
single remote control when the display is connected to the CONTROL S connector of the
video equipment or another display. Connect the CONTROL S OUT connector on this
display to the CONTROL S IN connector of the other equipment, and connect the
CONTROL S IN connector on this display to the CONTROL S OUT connector of the
other equipment.
REMOTE (D-sub 9-pin): This connector allows remote control of the display using the
RS-232C protocol. For details, contact your authorized Sony dealers.
This adaptor won’t work when installed in the OPTION 2 slot.
5 OPTION 1 slot
(VIDEO/COM port)
This slot supports video signals and communication functions. By installing an optional
adaptor (the BKM-FW series) in this slot, you can expand the input signal connectors or
control the display via the network.
6 VIDEO INPUT
ADAPTOR
(The BKM-FW10 is pre-
installed.)
S VIDEO IN (Mini DIN 4-pin): Connects to the S Video output of a piece of video
equipment.
S VIDEO OUT (Mini DIN 4-pin): Connects to the S Video input of a piece of video
equipment.
VIDEO IN (BNC): Connects to the video output of a piece of video equipment.
VIDEO OUT (BNC): Connects to the video input of a piece of video equipment.
AUDIO IN L/R (Pin jack): Connects to the audio output of a piece of video equipment.
The video signal or the S Video signal is automatically selected. Connect the cable (not
supplied) to the video connector or the S Video connector.
When connecting a piece of video equipment equipped with the S Video output
connector, you can enjoy better video performance by connecting it to the S Video
connector.
7 OPTION 2 slot
(VIDEO port)
This slot supports video signals. You can install an optional adaptor with video signal
input/output function into this slot. The optional adaptor with communication functions
should be installed in 5 OPTION 1 slot.
Connector Description
Note
To Next Page
Loading...
