34
GB
Specifications
Video processing
Panel system a-Si TFT Active Matrix LCD Panel
Display resolution 1,366 dots (horizontal) × 768 lines
(vertical)
Sampling rate 13.5 MHz to 140 MHz
Color system NTSC, PAL, SECAM, NTSC4.43,
PAL60, PAL-M, PAL-N
Input signal See page 33.
FWD-40LX2F/40LX2X:
Pixel pitch 0.648 (horizontal) × 0.648 (vertical) mm
(
1
/32 ×
1
/32 inches)
Picture size 885 (horizontal) × 498 (vertical) mm
(34
7
/
8
× 19
5
/
8
inches)
Panel size 40-inch (diagonal 1,016 mm)
FWD-32LX2F/32LX2X:
Pixel pitch 0.510 (horizontal) × 0.510 (vertical) mm
(
1
/32 ×
1
/32 inches)
Picture size 698 (horizontal) × 392 (vertical) mm
(27
1
/
2
× 15
1
/
2
inches)
Panel size 32-inch (diagonal 801 mm)
Inputs and Outputs
HD15 (RGB/COMPONENT IN)
D-sub 15-pin (female) (× 1) (See
page 35.)
AUDIO (COMMON AUDIO IN)
Stereo mini jack (× 1)
500 mVrms, high impedance
HDMI 1/HDMI 2 IN HDMI (compliant with HDMI
specifications 1.1)
VIDEO INPUT Adaptor BKM-FW10
VIDEO IN BNC (× 1)
Composite video, 1 Vp-p ± 2 dB sync
negative, 75 ohms
(automatic termination)
VIDEO OUT BNC (× 1) Loop-through
S VIDEO IN Mini DIN 4-pin (× 1)
Y (luminance): 1 Vp-p ± 2 dB sync
negative, 75 ohms terminated
C (chrominance): Burst
0.286 Vp-p ± 2 dB (NTSC),
75 ohms terminated
Burst 0.3 Vp-p ± 2 dB (PAL),
75 ohms terminated
S VIDEO OUT Mini DIN 4-pin (× 1) Loop-through
AUDIO IN Pin jack (× 2)
500 mVrms, high impedance
MONITOR CONTROL Adaptor BKM-FW20
REMOTE (RS-232C) D-sub 9-pin (× 1)
CONTROL S IN/OUT Mini jack (× 2)
General
Power requirements
100 V to 240 V AC, 50/60 Hz,
FWD-40LX2F/40LX2X:
2.3 A
FWD-32LX2F/32LX2X:
1.3 A
Power consumption
FWD-40LX2F/40LX2X:
200 W
FWD-32LX2F/32LX2X:
120 W
Speaker output 7 W + 7 W (6 ohms)
Adequate load impedance, 6 to 16 ohms
Operating conditions
Temperature: 0
°C to 35 °C
(32
°F to 95 °F)
Humidity: 20% to 90%
(no condensation)
Storing/transporting conditions
Temperature: –10
°C to +40 °C
(14
°F to 104 °F)
Humidity: 20% to 90%
(no condensation)
To Next Page
Loading...
