Sony HT-DDW5000 - Page 40

40
GB
a)
For details, refer to the page in the parentheses.
b)
This parameter is not available when the sound field is set to “2CH ST.”.
c)
This function does not work for signals with a sampling frequency of more than 48 kHz.
d)
If you adjust the tone during DTS 96/24 signal reception, the signal will be output only at 48 kHz.
Menu
[Display]
Parameters
[Display]
Settings Initial
setting
AUDIO
[5-AUDIO]
(page 44)
Digital audio input decoding
priority
a)
[DEC. PRI.]
DEC. PCM, DEC. AUTO DEC. AUTO
Digital broadcast language
selection
a)
[DUAL]
DUAL M/S, DUAL M, DUAL S,
DUAL M+S
DUAL M
Synchronizes audio with video
output
a)
[A.V. SYNC.]
A.V.SYNC. N, A.V.SYNC. Y A.V.SYNC. N
Naming inputs
a)
[NAME IN]
For details, see “Naming inputs”
(page 62).
VIDEO
[6-VIDEO]
(page 45)
DIGITAL MEDIA PORT
video assign
a)
[DMPORT V.]
–NONE, –VIDEO 1, –VIDEO 2,
–DVD, –SAT
–NONE
Naming inputs
a)
[NAME IN]
For details, see “Naming inputs”
(page 62).
SYSTEM
[7-SYSTEM]
(page 46)
Front speaker distance
a)
[FRT DIST.]
DIST. 1.0 m to DIST. 7.0 m
(0.1 m step)
DIST. 3.0 m
Center speaker distance
a)
[CNT DIST.]
DIST. 1.0 m to DIST. 7.0 m
(0.1 m step)
DIST. 3.0 m
Surround left speaker
distance
a)
[SL DIST.]
DIST. 1.0 m to DIST. 7.0 m
(0.1 m step)
DIST. 3.0 m
Surround right speaker
distance
a)
[SR DIST.]
DIST. 1.0 m to DIST. 7.0 m
(0.1 m step)
DIST. 3.0 m
Surround back speaker
distance
a)
[SB DIST.]
DIST. 1.0 m to DIST. 7.0 m
(0.1 m step)
DIST. 3.0 m
Subwoofer phase polarity
a)b)
[SW PHASE]
NORMAL, REVERSE NORMAL
Surround speaker position
a)
[SUR POS.]
BEHD/HI, BEHD/LO, SIDE/HI,
SIDE/LO
SIDE/LO
Brightness of the display
a)
[DIMMER]
0% dim, 40% dim, 70% dim 0% dim
A. CAL
[8-A. CAL]
(page 48)
Auto Calibration
a)
[AUTO CAL]
A.CAL NO, A.CAL YES A.CAL NO