Sony HT-DDW5000 - Tuner Operations; Listening to FM;AM radio; Automatic tuning; In case of poor FM stereo reception

54
GB
Listening to FM/AM radio
You can listen to FM and AM broadcasts
through the built-in tuner. Before operation,
make sure you have connected the FM and
AM antennas to the receiver (page 27).
Tip
The tuning scale differs depending on the area code
as shown in the following table. For details on area
codes, see page 3.
* The AM tuning scale can be changed (page 73).
1 Press TUNER repeatedly to
select the FM or AM band.
2 Press TUNING + or TUNING –.
Press TUNING + to scan from low to
high; press TUNING – to scan from high
to low.
The receiver stops scanning whenever a
station is received.
Using the controls on the
receiver
1 Turn INPUT SELECTOR to select the FM
or AM band.
2 Press TUNING MODE repeatedly to select
“AUTO T.”.
3 Turn TUNING +/–.
In case of poor FM stereo
reception
If the FM stereo reception is poor and “ST”
flashes on the display, select monaural audio
so that the sound will be less distorted.
Press FM MODE repeatedly until the
“MONO” indicator lights up on the display.
To return to stereo mode, press FM MODE
repeatedly until the “MONO” indicator on the
display lights off.
Tuner Operations
Area code FM AM
SP, TH1 50 kHz 9 kHz
MX, AR 50 kHz 10 kHz
E51 50 kHz 10 kHz*
Automatic tuning
123
46
78
0/10 ENTER
9
VIDEO1 VIDEO2 BD DVD
2CH A.F.D.
TV CH –
PRESET –
TV CH +
PRESET +
TUNING –
TV
TUNING +
FM MODE
MOVIE MUSIC
AMP MENU
CLEAR
DISPLAY
MUTING
TV VOL
MASTER VOL
DVD/BD
MENU
AUTO CAL
D.TUNING
D.SKIP
SAT TV SA-CD/CD TUNER
.
HmM
Xx
< <
>
5
REPLAY ADVANCE
MEMORY
O
RETURN/EXIT
>10/
-/--
TOOLS/
OPTIONS
MENU/HOME
2
1
FM MODE