55
GB
Tuner Operations
Enter the frequency of a station directly by
using the numeric buttons.
1 Press TUNER repeatedly to
select the FM or AM band.
You can also use INPUT SELECTOR on
the receiver.
2 Press D.TUNING.
3 Press the numeric buttons to
enter the frequency.
Example 1: FM 102.50 MHz
Press 1 b 0 b 2 b 5 b 0
Example 2: AM 1,350 kHz
Press 1 b 3 b 5 b 0
If you have tuned in an AM station, adjust
the direction of the AM loop antenna for
optimum reception.
4 Press ENTER.
You can also use MEMORY/ENTER on
the receiver.
If you cannot tune in a station
Make sure you have entered the right
frequency. If not, repeat steps 2 to 4. If you
still cannot tune in a station, the frequency is
not used in your area.
Presetting radio stations
You can preset up to 30 FM stations and 30
AM stations. Then you can easily tune in the
stations you often listen to.
1 Press TUNER repeatedly to
select the FM or AM band.
You can also use INPUT SELECTOR on
the receiver.
2 Tune in the station that you
want to preset using Automatic
Tuning (page 54) or Direct
Tuning (page 55).
Switch the FM reception mode, if
necessary (page 54).
Direct tuning
123
46
78
0/10
ENTER
9
VIDEO1 VIDEO2 BD DVD
2CH A.F.D. MOVIE MUSIC
AMP MENU
CLEAR
DVD/BD
MENU
AUTO CAL
D.TUNING
D.SKIP
SAT TV SA-CD/CD TUNER
5
MEMORY
>10/
-/--
1
4
3
2
Presetting radio stations
123
46
78
0/10
ENTER
9
VIDEO1 VIDEO2 BD DVD
2CH A.F.D.
TV CH –
PRESET –
TV CH +
PRESET +
TUNING – TUNING +
MOVIE MUSIC
AMP MENU
CLEAR
DISPLAY
MUTING
TV VOL
MASTER VOL
DVD/BD
MENU
AUTO CAL
D.TUNING
D.SKIP
SAT TV SA-CD/CD TUNER
.
HmM
<
<
>
5
REPLAY ADVANCE
MEMORY
O
RETURN/EXIT
>10/
-/--
TOOLS/
OPTIONS
MENU/HOME
1
PRESET
+/–
3,5
4
continued
To Next Page
Loading...
