Sony HT-DDW5000 - Video section; General; Speaker section

74
GB
Video section
Inputs/Outputs
Video: 1 Vp-p, 75 ohm
COMPONENT VIDEO:
Y: 1 Vp-p, 75 ohm
P
B/CB: 0.7 Vp-p, 75 ohm
P
R/CR: 0.7 Vp-p, 75 ohm
80 MHz HD Pass Through
General
Power requirements
Power output (DIGITAL MEDIA PORT)
DC OUT: 5 V, 0.7 A MAX
Power consumption 200 W
Power consumption (during standby mode)
0.3 W
Dimensions (width/height/depth) (Approx.)
430 × 157.5 × 318 mm
including projecting parts
and controls
Mass (Approx.) 7.7 kg
Speaker section
• Front speaker (SS-MSP5000)
Speaker system 2-way, 3-driver, Bass
reflex, Magnetically
shielded
Speaker unit
Woofer: 160 mm, cone type × 2
Tweeter: 25 mm, horn type
Rated Impedance 4 ohm
Dimensions (width/height/depth) (Approx.)
305 × 1,000 × 325 mm
(with foot)
Mass (Approx.) 13.5 kg
• Center speaker (SS-CNP5000)
Speaker system 2-way, 3-driver, Bass
reflex, Magnetically
shielded
Speaker unit
Woofer: 100 mm, cone type × 2
Tweeter: 25 mm, horn type
Rated Impedance 4 ohm
Dimensions (width/height/depth) (Approx.)
515 × 175 × 225 mm
(with foot)
Mass (Approx.) 4.8 kg
• Surround/Surround back speaker
(SS-SRP5000)
Speaker system Full range, Bass reflex
Speaker unit
Woofer: 100 mm, cone type
Rated Impedance 4 ohm
Dimensions (width/height/depth) (Approx.)
174 × 220 × 166 mm
(with foot)
Mass (Approx.) 1.4 kg
• Subwoofer (SA-WP5000)
Speaker system Active subwoofer, Bass
reflex, Magnetically
shielded
Speaker unit 250 mm, cone type
RMS output 200 W
5)
175 W
6)
Input LINE IN (input pin jacks)
5)
Measured under the following conditions:
6)
Measured under the following conditions:
Area code Power requirements
SP 230 – 240 V AC, 50/60 Hz
MX 127 V AC, 60 Hz
E51 120/220/240 V AC,
50/60 Hz
AR, TH1 220 – 230 V AC, 50/60 Hz
Area code Power requirements
E51, SP 240 V AC, 50 Hz
MX 127 V AC, 60 Hz
AR, TH1 230 V AC, 50 Hz
Area code Power requirements
AR, TH1 220 V AC, 50 Hz