19
US
C:\FY20HT_models\SB1\ANKI\UC2\01US-HTZ9FUC2\050CON.fm masterpage:
Right
HT-G700
5-013-058-11(1)
• When you connect the system and TV
with the HDMI cable (supplied), the
BLUETOOTH connection is canceled. To
connect the system and TV with the
BLUETOOTH function again, disconnect
the HDMI cable, then perform the
connecting operation from the start.
• While the system is connecting the TV
with the BLUETOOTH function and [AUTO
SOUND] is selected for the sound mode,
[STANDARD] is selected for the sound
mode.
You can turn the system on/off, adjust
the volume, and mute the sound by
using the TV remote control when
connecting the TV to the system
wirelessly.
1 Turn on the TV with the TV remote
control.
The system is turned on by
interlocking with the TV power, and
TV sound is output from the system.
2 Select the program or input of the
device by using the TV remote
control.
The sound of the displayed image
on the TV screen is output from the
system.
3 Adjust the volume of the system
by using the TV remote control.
When pressing the muting button
on the TV remote control, the sound
is muted temporarily.
If you select the input other than TV on the
remote control supplied with the system,
the TV sound is not output from the
system. To output the TV sound, select the
TV input by pressing INPUT.
Tip
When the TV is turned off, the system is
also turned off by interlocking with the TV
power.
Listening to Sound of the
Paired TV
Note
010COV.book Page 19 Wednesday, September 18, 2019 1:58 PM
To Next Page
Loading...
