47
US
C:\FY20HT_models\SB1\ANKI\UC2\01US-HTZ9FUC2\100TBS.fm masterpage:
Right
HT-G700
5-013-058-11(1)
Resetting the system
If the system still does not operate
properly, reset the system as follows.
1 Press MENU.
The setting menu appears in the
front panel display.
2 Press / to select [RESET], then
press ENTER.
3 Press / to select [ALL RESET],
then press ENTER.
4 Press / to select [START], then
press ENTER.
All the settings return to their initial
status.
To cancel resetting
Select [CANCEL] in step 4.
Press and hold (power) and –
(volume) on the bar speaker for more
than 5 seconds.
The settings return to their initial
status.
By resetting, the link with the subwoofer
may be lost. In this case, perform
“Connecting the Subwoofer” (page 15).
If You Cannot Perform
Resetting Using the Setting
Menu
Note
010COV.book Page 47 Wednesday, September 18, 2019 1:58 PM
To Next Page
Loading...
