34
US
HT-G700
5-013-058-11(1)
C:\FY20HT_models\SB1\ANKI\UC2\01US-HTZ9FUC2\090SET.fm masterpage: Left
Using the Setting Menu
You can set the following items with the setting menu. Your settings are retained
even if you disconnect the AC power cord (mains lead).
1 Press MENU to turn on the setting menu in the front panel display.
2 Press / repeatedly to select the item, then press ENTER.
You can select the following items.
• [SPEAKER] (Speaker settings) (page 34)
• [AUDIO] (Audio settings) (page 35)
• [HDMI] (HDMI settings) (page 36)
• [BT] (BLUETOOTH settings) (page 37)
• [SYSTEM] (System settings) (page 37)
• [RESET] (Resetting the system) (page 37)
• [UPDATE] (Updating the system) (page 38)
3 Press / repeatedly to select the setting, then press ENTER.
To return to the upper layer, press BACK.
4 Press MENU to turn off the setting menu.
Setting menu items
Changing the Settings
Items Function
[SPEAKER]
(Speaker
settings)
[LINK]
(Link mode)
• [START]: Performs the manual connection of the
subwoofer to the system. For details, see “Connecting the
Subwoofer” (page 15).
• [CANCEL]: Cancel the manual connection of the subwoofer.
[SUBWOOFER
INFO]
(Subwoofer
version
information)
Shows the version information of the subwoofer.
• [LATEST]: The subwoofer is the latest version.
• [PLEASE UPDATE]: The subwoofer is not the latest version.
• [NOT CONNECTED]: The subwoofer is not connected to the
system.
010COV.book Page 34 Wednesday, September 18, 2019 1:58 PM
To Next Page
Loading...
