45
US
C:\FY20HT_models\SB1\ANKI\UC2\01US-HTZ9FUC2\100TBS.fm masterpage:
Right
HT-G700
5-013-058-11(1)
is canceled and the system
returns to the previous status.
Set the night mode to off (page 29).
Sound skips or has noise.
If there is a device nearby that
generates electromagnetic waves,
such as a wireless LAN or a
microwave oven in use, locate the
system apart from it.
If there is an obstacle between the
bar speaker and the subwoofer,
move or remove it.
Do not cover the top of the bar
speaker with metal objects such as TV
frame, etc. Wireless functions may
become unstable.
Locate the bar speaker and the
subwoofer as close as possible.
Switch the wireless LAN frequency of
any nearby wireless LAN router or PC
to 5 GHz range.
Switch the network connection of the
TV or Blu-ray Disc player from
wireless to wired.
Pairing cannot be achieved.
Bring the system and the BLUETOOTH
device closer together.
Make sure the system is not receiving
interference from a wireless LAN
device, other 2.4 GHz wireless
devices, or a microwave oven. If a
device that generates
electromagnetic radiation is nearby,
move the device away from the
system.
BLUETOOTH connection cannot be
completed.
Make sure that the BLUETOOTH
indicator on the bar speaker is lit
(page 24).
Make sure the BLUETOOTH device to
be connected with is turned on and
the BLUETOOTH function is enabled.
Bring the system and the BLUETOOTH
device closer together.
Pair the system and BLUETOOTH
device again. You may need to cancel
the pairing with the system using
your BLUETOOTH device first.
Pairing information may be deleted.
Perform pairing operation again
(page 24).
Sound of the connected
BLUETOOTH mobile device is not
output from the system.
Make sure that the BLUETOOTH
indicator on the bar speaker is lit
(page 24).
Bring the system and the BLUETOOTH
device closer together.
If a device that generates
electromagnetic radiation, such as a
wireless LAN device, other
BLUETOOTH devices, or a microwave
oven is nearby, move the device away
from the system.
Remove any obstacle between the
system and the BLUETOOTH device or
move the system away from the
obstacle.
Reposition the connected
BLUETOOTH device.
Switch the wireless LAN frequency of
any nearby wireless LAN router or PC
to 5 GHz range.
Increase the volume on the
connected BLUETOOTH device.
The remote control of the system
does not function.
Point the remote control at the
remote control sensor on the bar
speaker (page 11).
Remove any obstacles in the path
between the remote control and the
system.
Replace both batteries in the remote
control with new ones, if they are
weak.
Make sure you are pressing the
correct button on the remote control.
Mobile Device Connection
Remote Control
010COV.book Page 45 Wednesday, September 18, 2019 1:58 PM
To Next Page
Loading...
