Sony KD-55A8F - 4.6 WB data transfer

Please apply Main board or panel is replaced.
<<
<[ 0.Soc to T-con ]>
Back
[</>] Set [Home]Exit
<[ 0.Soc to T-con ]>
<[ 0.Soc to T-con ]>
1. In “Panel/PQ” service mode
a. Go to “WB/Mura/CUC data transfer” category by “↑” or “↓”.
b. To select “WB/Mura/CUC data transfer”, press → button.
c. To change data , press “←” or “→” on remote commander.
2. In “WB/Mura/CUC data transfer”
a. Select “WB/Gamma data transfer” by pressing “↑” or
“↓” on remote commander .
b. To change the items, press “←” or “→” on remote
commander and press “Enter” button.
Selectable items are:
 0. SoC to T-con
 1. T-con to SoC
 2. No action
c. “Mura data transfer” and “CUC data transfer” are also
displayed on the menu, but Mura and CUC function
do not work on CR model. Please skip these items by
pressing “↓” on remote commander .
d. Select “[start]” and press “Enter” button to start
transfer.
75
4.6 WB data transfer
Disuse in CR model
SYSSET
2018/03/1622:32:44(GMT+09:00)