Sony KLV-26M400A - Balancer (ETC-MT Inverter) Board Removal; Loudspeakers, LED Guide, and HM4 Board Removal

18
KLV-26M400A/32M400A/37M400A/40M400A
KLV-26M400A/32M400A/37M400A/40M400A
1-9. BALANCER (ETC-MT INVERTER) BOARD REMOVAL
1
Remove 6 screws
2
Disconnect 6 connectors from board (KLV-26M400A ONLY)
Disconnect 7 connectors from board (KLV-32M400A ONLY)
Disconnect 8 connectors from board (KLV-37M400A ONLY)
Disconnect 10 connectors from board (KLV-40M400A ONLY)
1-10. LOUDSPEAKERS, LED GUIDE, AND HM4 BOARD REMOVAL
1
2
SHIELD REMOVAL
CAUTION!
Disconnect the
Balancer Board Connectors
REMOVE SCREWS
SECURING
SHIELD
REMOVE
CONNECTOR AND
PULL BOARD TO
THE RIGHT
1
Slide out Loudspeakers from Bezel
2
Remove 2 screws
3
Disconnect 1 connector
1
2
3
Loudspeaker
LED Guide
HM4 Board
Bezel