Sony MVS-6500 System - Page 50

50
Saving DME Wipe Settings in a DME Wipe Snapshot
Basic Image Creation Operations
1 Register the DME wipe snapshot in a button.
a In the Flexi Pad, press the [DME WIPE] button.
b Press the [M/E1] button.
c Holding down the [DME WIPE] button, press the
button you want to register (0 to 9).
The button lights yellow when successfully
registered.
Buttons that are lit already have a registered DME
wipe snapshot. Pressing one of these buttons will
overwrite the existing contents.
Flexi Pad
2 To check that the DME wipe snapshot is registered
correctly, use another operation to alter the settings
and then recall the registered DME wipe snapshot.
a Press the [DME WIPE] button.
b Press the [M/E1] button.
c Press the button registered in step 1.
The registered DME wipe settings are immediately
recalled.
Recalled DME wipe pattern and border setting
Notes
DME WIPE button
[0] to [9] buttons
M/E1 button