Sony MVS-6500 System - Managing Multiple Keys and Display Priority

52
Inserting Titles (Keys)
Basic Image Creation Operations
Flexi Pad
Key source (assigned in signal pair) for title video
4 Insert the key.
a Check the post-insertion video on the monitor
assigned beforehand for key preview output.
b Press the [KEY1 ON] button in the transition
control block.
To insert the key using an auto transition, press the
[KEY1 TRANS] button.
Transition control block
5 Insert keys 2 to 4.
a Press the [KEY2] button, turning it on.
b Repeat steps 3 and 4 to insert key 2.
c Set key 3 and key 4, as required.
Flexi Pad
6 Change the key display priority.
a In the transition control block, press the [KEY
PRIOR] button, turning it off.
b Holding down the [PRIOR SET] button, press the
[KEY1] button.
Memo
LUM button
AUTO SEL button
KEY1 button
KEY ADJ button
M/E1 button
KEY1 ON button
KEY1 TRANS button
KEY2 button
Key 1
Key 2