90
GB
Table of
contents
Sample photo Menu Index
Face Registration
If you register faces in advance, the camera can detect the registered face as a priority
when [Face Detection] is set to [On (Regist. Faces)].
1 MENU t [Camera] t [Face Registration] t desired mode.
1 MENU t [Camera] t [Face Registration] t [New Registration].
2 Align the guide frame with the face to be registered, and press the shutter
button.
3 When a confirmation message appears, select OK.
• Up to 8 faces can be registered.
• Shoot the face from the front in a brightly lit place. The face may not be registered correctly if it is
obscured by a hat, a mask, sunglasses, etc.
• Even if you execute [Reset Default], registered faces are not deleted. When you execute [Factory Reset],
all the registered face are deleted.
• Even if you execute [Delete], the data for registered face will remain in the camera. To delete the data for
registered faces from the camera, select [Delete All].
• You cannot select priority level 8 by touching the screen. If you want to change the level to 8, select it
using the control wheel (NEX-5R only).
New Registration Registers a new face.
Order Exchanging Changes the priority of faces previously registered.
Delete Deletes a registered face. Select a face and press OK.
Delete All Deletes all registered faces.
New Registration
Notes
Order Exchanging
1 MENU t [Camera] t [Face Registration]
t [Order Exchanging].
2 Select a face for which you want to change
the priority.
3 Select the priority level.
The smaller the number of the position, the higher the
priority.
Notes
To Next Page
Loading...
Need help?
General
